CDA RC 9000 Users operating instructions Betriebsanleitung PDF herunterladen (Seite 10)

TECHNISONIC INDUSTRIES LIMITED

TDFM-9000 Installation Instructions TiL 11RE442 Rev. B Issue 5

2-1

2.1 GENERAL

This section contains information and instructions for the correct installation of the TDFM-9000

Transceiver.

2.2 EQUIPMENT PACKING LOG

Unpack the equipment and check for any damage that may have occurred during transit. Save

the original shipping container for returns due to damage or warranty claims. Check that each

item on the packing slip has been shipped in the container.

2.3 INSTALLATION

The TDFM-9000 Transceiver is designed to be Dzus mounted and should be installed in

conjunction with an IN-9000 installation kit. See Figure 2.1 for an outline drawing of the unit with

dimensions to facilitate the installation.

2.4 INSTALLATION KIT - CONTENTS

The IN-9000 installation kit (P/N 129292) consists of:

1. One 25 Pin Cannon D mating connector (female) complete with crimp pins and hood.

2. One 15 Pin HD Cannon D mating connector (female) complete with crimp pins and hood.

3. One 15 Pin HD Cannon D mating connector (male) complete with crimp pins and hood.

4. 6 BNC connectors.

2.5 ANTENNA INSTALLATION

The type and number of antennas depends on the model of transceiver being installed. The

following is a list of recommended antennas for the various RF modules:

VHF 136 to 174 MHz Comant Part # CI-292-3 or -4

UHFLO 403 to 470 MHz Comant Part # CI-275

UHFHI 450 to 520 MHz Comant Part # CI-285

800 800 to 870 MHz Comant Part # CI-306

800/700 764 to 870 MHz Comant Part # CI-285

VHF/UHF/800 Multiband Rami Part # AV-925

The antenna should be mounted on the bottom of the aircraft whenever possible. Consult with

instructions provided with the antenna. Connect the RF cables to the back of the transceiver

using the MALE BNC connectors provided in the installation kit. It is possible to use equivalent 50

ohm aviation antennas that cover the appropriate bandwidths.

SECTION 2: INSTALLATION INSTRUCTIONS

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 33 34

Keine Kommentare

CDA RC 9000 Users operating instructions Betriebsanleitung Seite 10