CDA hc9620 Handbuch PDF herunterladen (Seite 8)

How to Use the Hob

The ceramic surface of the hob allows fast transmission of heat

vertically from the heating elements under the glass to the pans on

the hob top.

The heat does not spread horizontally, so the hob top remains

relatively cool only a few centimetres from the zone in use.

To switch heating zones on

When the mains power supply is switched on, the buzzer beeps once

and all the indicators light up for 1 second, then go out. This indicates

that the ceramic hob has entered standby mode.

Touch the “On/O” control ; all the indicators show “-“.

(If you don’t switch a heating zone or the minute minder on within

approx. 1 minute, the ceramic hob will automatically switch o.)

Place a suitable pan on the cooking zone that you wish to use (see

“Ecient Use of Your Hob” section for selection of suitable pans).

Ensure the bottom of the pan and the surface of the cooking zone are

clean and dry.

Touch the “Heating zone control” for the zone required, to activate it.

Note: The digital display showing power level is also the “Heating

zone control”.

While the “Heating zone control” is still ﬂashing, use the single “Slider

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 23 24

Keine Kommentare

CDA hc9620 Handbuch Seite 8