CDA HG3602 Wartungshandbuch PDF herunterladen (Seite 15)

30 mm

Space for

connections

Clearance

Separator

Installation

Technical Information for the Installer

In order to install the hob into the kitchen ﬁxture, a hole with the

dimensions shown in ﬁg. 16 has to be made, bearing in mind the

following:

– Within the unit, between the bottom of the hob and the upper

surface of a shelf there must be a clearance of at least 30mm.

– It is absolutely essential that you place a separator between the

base of the hob and the built-in unit.

– If the hob is installed over a built-in oven, there must be a

distance of at least 30mm between the two appliances. The oven

shall be provided with cooling fan. The two appliances should

be connected to the gas/electrical supply with independent

connections.

– The hob must be kept no less than 100mm away from any side

wall (ﬁg. 17).

– The hob must be installed at least 50mm from the wall (ﬁg. 16).

– There must be a distance of at least 650mm between the hob

and any wall cupboard or extractor hood positioned immediately

above (see ﬁg. 17).

Installation in Kitchen Cabinet with Door

It is recommended that a 30mm clearance be left between the

cooktop and the ﬁxture surface (ﬁg. 18).

Fig. 18

500 mm

650 mm

450 mm

490

(2)

270

300

510

(1)

490

(2)

270

300

510

(1)

Fig. 16

Fig. 17

(1): 52 mm from top of countertop

(2): at least 50 mm between the back

side of the cut-out and the back of

the countertop.

100 mm minimum between the side

of the cut-out and the side wall

HG3601FR

HG3602FR

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 23 24

Kommentare zu diesen Handbüchern

Keine Kommentare

CDA HG3602 Wartungshandbuch Seite 15

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Kochfelder CDA HG3602