CDA RC 9621 Series Wartungshandbuch PDF herunterladen (Seite 30)

Inside of Oven

The oven should always be cleaned after use when it has cooled down.

The cavity should be cleaned using a mild detergent solution and warm water. Suitable proprietary chemical

cleaners may be used after rst consulting with the manufacturers recommendations and testing a small

sample of the oven cavity. Abrasive cleaning agents or scouring pads/cloths should not be used on the cavity

surface.

NOTE: The manufacturers of this appliance will accept no responsibility for damage caused by chemical or

abrasive cleaning.

Let the oven cool down and pay special attention not to touch the hot heating elements inside the oven

cavity.

Assembling and Dismantling of the Side Runner Frames

– Fit the side runner frames into the holes on the side walls inside the oven (Fig. 27).

– Slide into the guides, the shelf and the tray (g. 28).

The rack must be tted so that the safety notch, which stops it sliding out, faces the inside of the oven; the

guard rail shall be at the back.

– To dismantle, operate in reverse order.

Fig. 27

Fig. 28

Guard rail

Stop notch

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 39 40

Keine Kommentare

CDA RC 9621 Series Wartungshandbuch Seite 30