CDA wc431 Bedienungsanleitung PDF herunterladen (Seite 12)

12

Softener Adjustment

The efficiency of your dishwasher

depends on the softness of the tap

water.

To ensure best efficiency, the

dishwasher is equipped with a system

that reduces the hardness in the mains

water supply. The efficiency will increase

when the system is correctly set. To find

out the water hardness level of your

water supply you can use the test strip

supplied or alternatively contact your

local water board.

• Open the testing strip (figure 5).

• Run water through the tap for one

minute.

• Hold the testing strip in water for

one second.

• Remove from the water and

shake the test strip to remove

excess water.

• Wait for one minute.

• Check the number of marks on

the strip to see the level of water

hardness.

If the hardness of the water you use is

above 63 dE or if you are using well

water; you are recommended to contact

your local water board to confirm the

water hardness level and to use filter and

water refinement devices.

Please note: The level of water

Fig.5

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 27 28

Kommentare zu diesen Handbüchern

Keine Kommentare