CDA wc431 Bedienungsanleitung PDF herunterladen (Seite 25)

25

Installation

• Do not install this appliance if it is

damaged in any way. Installing a

damaged appliance may

invalidate the warranty.

• The water supply tap should be

located in an adjacent cupboard

so that it can be accessed after

installation.

• Ensure the appliance is level by

adjusting the feet as necessary.

The dishwasher is equipped with

an adjustable rear foot that can

be raised or lowered by means

of an adjustment screw, located

in the centre of the kick plate.

• Only use the water inlet supplied

with the appliance.

• If the water pressure is above 10

bar, a pressure relief valve

should be used.

• After connecting the water

supply, check to ensure there

are no leaks.

• The water outlet can either be

connected to a water drain or to

a sink outlet spigot. This

connection should be at a

minimum of 50 cm and a

maximum of 110 cm from the

floor. The drain hose should be

no longer than 4m in length to

ensure good performance from

the dishwasher.

• To prevent syphoning, ensure

1 2 ... 20 21 22 23 24 25 26 27 28

Kommentare zu diesen Handbüchern

Keine Kommentare