CDA CST Spezifikationen PDF herunterladen (Seite 25)

15, 30, & 60 cfm Compact Dryers Chapter 3: Installation 24 of 57

Auto-Tuning the Dryer

1. Apply power to the control circuit.

2. Press and hold the Level Key and the Mode Key at the same time for 3

seconds. This will get you into the “protection screen” which will probably

be set at 2.

3. From this screen, use the Down Key to change the (2) green setting to 0.

4. Exit the protection screen by pressing and holding the Level Key and the

Mode key at the same time. The control should only display the Set Point

(green) and actual temperature (red).

5. Use the Level Key to access the Auto-Tune screen. Use the Up Key to

enable the Auto-Tune function. The “AT” display (in red) should be flashing

once enabled.

6. Exit the Auto Menu by pressing the Level Key. The control should be

showing the Set Point (green) and Actual Temperature (in red) is

flashing/blinking.

7. The control is now in the Auto Tune function and will automatically stop

flashing. This procedure may take several minutes.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 57 58

Keine Kommentare

CDA CST Spezifikationen Seite 25