CDA fwc603 Anleitung zur Fehlerbehebung PDF herunterladen (Seite 5)

Use and Controls

fwc603 & fwc623

To switch the power on/o

Press and hold the power button for ve seconds.

To change the temperature

• Press the "+" or "-" buttons for the appropriate zone until the required temperature is shown on the display.

• The preset temperature is 10°C/50°F for left/upper zone and 16°C/60°F for right/lower zone.

• To change the temperature display from Fahrenheit to Celsius, or Celsius to Fahrenheit, press and hold the light button

for ve seconds.

• To view the set temperature, touch the appropriate "+" or "-" button at any time and the set temperature will ash in the

LED display for ve seconds.

• The display shows the current internal temperatures when the wine cooler is on.

Optimal temperature selection

Whilst wine is best stored at temperatures between 13 and 15˚C, your wine can also be stored at drinking temperature, for

red wine this is between 15 and 17˚C, and for white wine between 12 and 13˚C.

To use the internal light

• Press the light button to switch the light on or o.

Please note:

The temperature in the lower zone must be set either the same or higher than the temperature in the upper zone. For

optimal performance, the temperatures in the two zones should dier by at least 4˚ C.

Key:

1 – Power button

2 – Left/Upper zone

"+" button

3 – Left/Upper zone

"-" button

4 – Right/Lower zone

"+" button

5 – Right/Lower zone

"-" button

6 – Light button

41 2

g. 3

5 6

1 2 3 4 5 6 7 8 9 10 ... 15 16

Keine Kommentare

CDA fwc603 Anleitung zur Fehlerbehebung Seite 5